NYLON 6/6 NATURAL
B.I.R.S. Machine & Supply distributor of Nylon 6/6 natural extruded rod & sheet.
Nylon 6/6 (polyhexamethylene adiptimide) is an extruded general-purpose nylon. Like nylon 6 it has good mechanical properties and wear resistance. Nylon 6/6 has a much higher melting point than cast nylon 6.
Nylon 6/6 also has a higher intermittent use temperature than cast nylon 6. Nylon 6/6 is limited by its processing methods. In extrusion, it nylon 6/6 is limited to constant cross-section profiles as well as the size constraints of the die geometry. However, there are a larger number of fillers available for extruded nylon 6/6.
Flammability of Nylon 6/6 meets UL94-HB, Natural resin meets FDA, NSF, USDA, and Dairy 3A, Nylon 6/6 resin specification ASTM D-4066 PA0114, stock shape ASTM D-5989-05 S-PA0111
FEATURES
-
Very Stiff Material
-
Great Wear Properties
-
Good Mechanical
-
Impact Properties
-
Self Lubricating
-
Abrasion Resistant
APPLICATIONS
Bushings, Bearings, Gears, Machine Screws, Threaded Rods, Pulleys, Nuts, Bolts, Thrust Washers, Low and Medium Stress Components
NYLON ROD 6/6 EXTRUDED
0.375" (3/8" diameter)
0.500" (1/2" diameter)
0.625" (5/8" diameter)
0.750" (3/4" diameter)
0.875" (7/8" diameter)
1.000" (1" diameter)
1.250" (1-1/4" diameter)
1.375" (1-3/8" diameter)
1.500" (1-1/2" diameter)
1.625" (1-5/8" diameter)
1.750" (1-3/4" diameter)
1.875" (1-7/8" diameter)
2.000" (2" diameter)
SHEET SIZE
0.031" x 24.000" x 48.000"
0.062" x 24.000" x 48.000"
0.093" x 24.000" x 48.000"
0.125" x 24.000" x 48.000"
0.187" x 24.000" x 48.000"
B.I.R.S. Machine & Supply
12 Buckelew Bridge Road
Anniston, Alabama 36207
P: (256) 405-5370
F: (256) 831-9057
We are located in east Alabama just off Interstate I20 between Atlanta, Georgia and Birmingham, Alabama.
More than machining and fabrication...Superior Service!