PTFE SHEET (Extruded, Molded, Skived)
B.I.R.S. Machine & Supply is a distributor of PTFE sheet. We supply extruded PTFE sheet & rolls, molded PTFE sheet and skived PTFE sheet.
PTFE sheet is available in a wide range of sizes, PTFE sheet is a key engineering plastic highly specified because of its extremely high temperature resistance, capability to withstand strong chemicals, acids, oils, greases and its exceptional lack of friction which makes it a slippery plastic. PTFE sheet is water resistant and offers a high electrical resistance. PTFE sheet it is highly specified in high end electrical resistance appliances. PTFE Virgin is a soft, nontoxic fluoropolymer (also known as Teflon®, which is a registered trademark of DuPont)
PTFE Extruded Sheet & Rolls
PTFE Extruded Sheet and rolls are extruded through extrustion dies to thickness and width.
Thickness & Sizes
(1/64") .015" x 48" x 48"
(1/64") .015" x 60" x 60"
(1/32") .031" x 48" x 48"
(1/16") .062" x 48" x 48"
(1/16") .062" x 60" x 60"
(3/32") .093" x 48" x 48"
(1/8") .125" x 48" x 48"
(1/8") .125" x 60" x 60"
PTFE Skived Rolls
1/32" x 48" x 200 lb roll
1/16" x 48" x 200 lb roll
1/8" x 48" x 200 lb roll
3/32" x 48" x 200 lb roll
PTFE Molded Sheet
PTFE Molded sheets are pressed into thickness from 3/8 up to 4" thick. Normally PTFE Molded Sheets are Virgin Grade or higher preformance grades such as bronze-filled, stainless-filled, glass-filled, mineral-filled, mica-filled, graphite-filled, moly-filled, carbon-filled, etc...
Thickness & Sizes
0.375" x 48" x 48"
0.500" x 48" x 48"
0.750" x 48" x 48"
1.000" x 48" x 48"
1.250" x 48" x 48"
1.500" x 48" x 48"
1.750" x 48" x 48"
2.000" x 48" x 48" (max thickness for filled materials)
2.250" x 48" x 48"
2.500" x 48" x 48"
3.000" x 48" x 48"
2.750" x 48" x 48"
3.000" x 48" x 48"
3.250" x 48" x 48"
3.500" x 48" x 48"
3.750" x 48" x 48"
4.000" x 48" x 48"
4.000" x 24" x 24"
5.500" x 24" x 24"
6.000" x 24" x 24"
5mm" x 39" x 78"
5mm" x 59" x 59"
6mm" x 39" x 78"
6mm" x 59" x 59"
8mm" x 39" x 78"
8mm" x 59" x 59"
10mm" x 39" x 78"
10mm" x 59" x 59"
12mm" x 39" x 78"
12mm" x 59" x 59"
20mm" x 39" x 78"
20mm" x 59" x 59"
25mm" x 39" x 78"
25mm" x 59" x 59"
30mm" x 39" x 78"
35mm" x 39" x 78"
40mm" x 39" x 78"
50mm" x 39" x 78"
PTFE Skived Sheet
PTFE Skived sheets are manufactured from Molded PTFE billets skived into thinner sheet thickness. PTFE Skived Sheets are offered in PTFE Virgin Skived Sheets and PTFE Mechicancal Grade Sheets.
PTFE Skived Sheet Thickness & Sizes
(1/64") .015" x 48" x 48"
(1/64") .015" x 60" x 60"
(1/32") .031" x 48" x 48"
(1/16") .062" x 48" x 48"
(1/16") .062" x 60" x 60"
(3/32") .093" x 48" x 48"
(1/8") .125" x 48" x 48"
(1/8") .125" x 60" x 60"
(3/16") .187" x 48" x 48"
(3/16") .187" x 60" x 60"
(1/4") .250" x 48" x 48"
(1/4") .250" x 60" x 60"
B.I.R.S. Machine & Supply
12 Buckelew Bridge Road
Anniston, Alabama 36207
P: (256) 405-9057
F: (256) 831-9057
We are located in east Alabama just off Interstate I20 between Atlanta, Georgia and Birmingham, Alabama.
