CIP151A Composite
B.I.R.S. Machine & Supply is a distributor of CIP151A Composite sheet, tube and
machine components.
CIP151A Composite is one of our most commonly used CIP materials due to its ability to provide excellent performance in a wide range of applications and environments. CIP151A is manufactured with 100% polyester material (textile and resin) with the solid lubrication additives PTFE and molybdenum disulfide (MoS2) evenly dispersed throughout the resin. Enhancement A is added, increasing the overall strength and reduce friction and wear.
CIP151A can be used in wet and/or dry situations offering excellent strengths; great option for low friction and wear rate.
Applications
-
Hydraulic Cylinder Pivot Bushing
-
Wear Pads Inside Pipehandling Assembly
Properties
-
Self lubricating
-
Low coefficient of friction
-
High edge and shock load capabilities
-
High load capacity
-
Negligible water swell
-
Environmentally friendly
-
Anisotropic Properties - Will Vary When Comparing Values Normal or Parallel to Laminate
-
Compressive Strength, Breaking – ASTM D695 - Normal to Laminate = 50,000 PSI
-
Compressive Strength, Breaking – ASTM D695 - Parallel to Laminate = 13,500 PSI
-
CLTE Will Also Vary Based on Laminate Orientation
Limitations
-
Not Intended for High Speed Bearing Applications, Ideal for High Load & Slow Rotating Speed
Applications
-
Aggregate Plant Walking Beam Pivot Bushing
-
Navigation Lock Pivot Bushing
Available Sizes
Sheet
Thickness .125" to 6.000"
Standard Widths 16.000", 24.000" & 32.000"
Standard Lengths 24.000", 36.000", 48.000" & 50.000"
Tube
Maximum Outside Diameter 65.000" Minimum Inside Diameter 0.500"
Standard Lengths 16.000", 24.000" & 32.000"
B.I.R.S. Machine & Supply
12 Buckelew Bridge Road
Anniston, Alabama 36207
P: (256) 405-5370
F: (256) 831-9057
E:
We are located in east Alabama just off interstate I20 between Atlanta, Georgia and Birmingham, Alabama.