G11 NON FR5 Mil-I-24768/3 GEB

 

B.I.R.S. Machine & Supply Inc distributor of G11 NON FR5 sheet, rod & tube.

 

Glass-Epoxy Laminates are continuous woven glass fabric impregnated with

epoxy resin. These materials exhibit outstanding electrical characteristics and

dimensional stability primarily because water absorption is virtually non-existent. The FR Grades contain bromine to make them fire-retardant, while G-10 and G-11 do not. Therefore, FR-5 can be substitutes for G-11 in most cases, but G-11 cannot be safely substituted for FR-5. (Many suppliers have gotten into the bad habit of referencing material as G-11/FR-5, where it is technically FR-5. G-11 is not normally a stock item.) G-11 and FR-5 have higher operating temperature and improved strength at higher temperatures than G-10 and FR-4. These materials are normally light green in color and come as sheets, tubes and rods. Glass-Epoxy Laminates Properties

 

This grade has similar properties to G11/FR5 in both dry and humid conditions and maintains good dimensional stability and creep resistance in high and low temperature cycling environments. It certifies to NEMA G11 and MIL-I-24768/3 Type GEB.

 

FEATURES

• FR Grades are Fire Retardant

• High Dielectric Strength

• High Mechanical Strength

• Low CLTE

 

LIMITATIONS

• Difficult to Machine

• Properties vary based on reinforcement orientation

 

APPLICATIONS

• Arc Barriers

• Down hole Oil & Gas Machined Components

• Electrical Housings

• Electrical Insulators

• Structural Components

• Terminal Boards

• Sleeves

 

SHEET SIZES:  

36" x 48", 40" x 48" and 48" x 96" ...... cut to size available

 

THICKNESS 36" x 48"

0.031", 0.047", 0.062", 0.078", 0.093, 0.125", 0.187", 0.250", 0.312", 0.375", 0.500", 0.625", 0.750", 0.875", 1.000", 1.250", 1.375", 1.500", 1.750", 1.875", 2.000" 

 

THICKNESS 40" x 48"

1.750", 2.000", 2.250", 2.500", 2.750", 3.000", 3.500", 4.000"

 

THICKNESS 48" x 96"

0.005", 0.10", 0.015", 0.020", 0.031", 0.047", 0.062", 0.078", 0.093, 0.125", 0.156", 0.187", 0.250", 0.312", 0.375", 0.437", 0.500", 0.562", 0.625", 0.750", 0.875", 1.000", 1.250", 1.500"

 

ROD DIAMETER SIZES:

.062", .093", .125", .187", .250", .312", .375", .437", .500", .625", .750", .875", 1.000", 1.125", 1.250", 1.375", 1.500", 1.625", 1.750", 2.000", 2.250", 2.500", 2.750", 3.000", 3.250", 3.500", 3.250", 3.500", 3.750", 4.000", 4.500". 4.500", 5.000"

 

TUBE SIZE:

 

 

B.I.R.S. Machine & Supply

12 Buckelew Bridge Road

Anniston, Alabama 36207

P: (256) 405-5370

F: (256) 831-9057

E: salesbirsmachine@gmail.com

 

We are located in east Alabama just off Interstate I20 between Atlanta, Georgia and Birmingham, Alabama.