PTFE Graphite-Filled
B.I.R.S. Machine & Supply is a distributor of PTFE (Teflon®) Graphite- filled sheet, rod
and tube.
Graphite-filled PTFE has exceptional chemical resistance to corrosive environments and it is compatible with most hydraulic fluids. PTFE Graphite-Filled exhibits good initial wear and rubbing/sliding characteristics in dry and water applications. Excellent performance when used for hydraulic or pneumatic compression type rod and piston seals, bearing bands and rotary applications. Graphite is commonly blended with carbon and PTFE (Teflon).
Filler Percent Available
-
5% Graphite
-
10% Graphite
-
15% Graphite
-
20% Graphite
-
25% Graphite
FEATURES
-
Exceptional chemical resistances to corrosive environments.
-
Good wear resistance in dry or wet environments.
-
Low coefficient of friction compared to other filled PTFE materials.
-
Higher flexural modulus and surface hardness than unmodified PTFE.
APPLICATIONS
-
Bushings
-
Bearings
-
Compression rods
-
Seals
-
Wear strips
B.I.R.S. Machine & Supply
12 Buckelew Bridge Road
Anniston, Alabama 36207
P: (256) 405-5370
F: (256) 831-9057
We are located in east Alabama just off Interstate I20 between Atlanta, Georgia and Birmingham, Alabama.