PHENOLIC Grade G10 NON FR4

 

B.I.R.S. Machine & Supply distributor of G10 NON-FR4 sheet, rod & tube.

 

NEMA grade G-10 sheet material is among the most versatile all-around

laminate grades available. Some important features include its high

mechanical strength, stability in high and low temperature applications, good

electric strength and dielectric loss properties either wet or dry. With virtually

non-existent water absorption, this material is an outstanding choice as an insulator. G10 properties allow its use in a wide range of applications. NEMA G-10 (True G10) has a non-halogen epoxy resin binder reinforced

with fiberglass fabric that is used in applications where halogen content is not desired and low water absorption is essential. 

Epoxyglas G-10 material is available in a wide range of thicknesses in standard sheet sizes as shown below as well as G10 Tubes, and pre-cut panels

 

G10 non FR4 MIL-I-24768/2

 

FEATURES

• Light green

• Continuous filament woven glass fabric grade, impregnated with epoxy resin

• Excellent electrical values & characteristics 

• Low moisture absorption & dissipation factor

• Machines quickly & easily

• High tensile, compressive, flexural & impact strength

• High strength-to-weight ratio

• Impact strength (ASTM D732): 10-12 ft. lb/in. of notch

• Moisture absorption rate: .15%

• Maximum temperature: 284°F

 

APPLICATIONS

• Terminal boards

• Washers

• Sleeves

• Structural components

 

 

B.I.R.S. Machine & Supply

12 Buckelew Bridge Road

Anniston, Alabama 36207

P: (256) 405-5370

F: (256) 831-9057

E: salesbirsmachine@gmail.com

 

We are located in east Alabama between Atlanta, Georgia and Birmingham, Alabama.