WR®300 carbon-fiber reinforced molded PEEK
B.I.R.S. Machine & Supply is a distributor of WR®300 carbon-fiber reinforced compression
WR®300 is a carbon-fiber reinforced compression molded PEEK™ often selected by pump manufacturers and users for pump bushings and case or impeller wear rings. Maximum service life is achieved in clean, lubricated and/or moist environments.
WR300 allows the pump user to increase pump efficiency by running tighter wear ring clearances while decreasing potential pump damage when pumps are cavitated or experience radial bearing failures. WR300 is API 610 approved for (stationary/stationary and rotating) wear applications.
Excellent chemical resistance
Low coefficient of friction
Thermal shock resistance
Greene, Tweed’s CPI/MRO group maintains common wear ring and bushing billet sizes in inventory. Outer billet diameters range from 1 in. to 33 in. (2.54 cm. to 83.82 cm.), and lengths of up to 8 in. (20.32 cm.) are possible.
WR300 should not be used in abrasive medias or in press-in applications above 275°F (135°C).
B.I.R.S. Machine & Supply
12 Buckelew Bridge Road
Anniston, Alabama 36207
P: (256) 405-5370
F: (256) 831-9057
We are located in east Alabama just off interstate I20 between Atlanta, Georgia and Birmingham, Alabama.