PTFE CARBON-FILLED
B.I.R.S. Machine & Supply distributor of PTFE carbon-filled sheet, rod & tube.
PTFE Carbon Filled has good chemical resistance to corrosive environments, has better creep and wear resistance compared to standard PTFE materials. These properties are improved with the addition of a carbon filler. This filler improves dimensional stability, raises the heat deflection temperature, improves creep resistance and the dynamic bearing performance. PTFE Carbon-Filled exhibits good initial wear and rubbing/sliding contact characteristics in both dry and wet/water applications. (Temperature: -260°C
to +250°C). It is frequently used in piston rings to reduce cylinder wall wear by entrapping abrasive foreign particles in their relatively soft surfaces. Teflon® is a registered trademark and a brand name owned by
DuPont.
Percentages available and others upon request.
-
5% Carbon-Filled PTFE
-
10% Carbon-Filled PTFE
-
15% Carbon-Filled PTFE
-
20% Carbon-Filled PTFE
-
25% Carbon-Filled PTFE
FEATURES
-
Extremely good chemical resistance against virtually all media
-
Good sliding properties
-
Improved dimensional stability
-
Creep resistance
-
Moderately electrical conductivity
-
Anti-static
APPLICATIONS
-
Piston rings
-
Pump housings
-
Valve seats
-
Gaskets
-
Roller coverings
-
Shaft bearings
-
Filter housings
-
Etching plates
-
Shaft seals
-
Slide runners
-
Chemical engineering
-
Conveyor technology
-
Pump and instrument construction
-
Electrical industry
-
Electronics
-
Laser technology
-
Fume purification
-
Pure water production
-
Cryogenics
-
Filter technology
-
Food & beverage
-
Medical technology